Creating A Custom Fluorescent Image Using The Ymcfko Ribbon; Configuring Fluorescent Data Using The Application - Fargo DTC4500e User Manual

4.7.4.2

Creating a Custom Fluorescent Image using the YMCFKO Ribbon

There are three methods used to accomplish the creation of a custom fluorescent image when using
the YMCFKO Ribbon.
Printer Driver Method: The fluorescent panel image can be configured directly from the badge
application software.
Note: You can now print a unique fluorescent image, such as the card holder's picture on each card.
Asure ID Method: This method is described in the Asure ID Software User Guide. See the
procedure relating to the Fluorescent Panel Ribbon. For more information about, please visit the HID
Global support website.
Workbench Method: This method is described in the Workbench User Guide and the Help facility.
See the User Guide on your CD. For Help, enter Workbench by clicking the Diagnostics button from
the Card tab of the Printing Preferences page and select Help.
4.7.4.3

Configuring Fluorescent Data using the Application

This process creates a fluorescent image on your card using a simple text string command in your
badge application.
Step Procedure
1 Creating Fluorescent Text: Create a new text box in your badge application.
Type the TEXT that you want to appear as fluorescent and put a ~T before the start of the
2
text with no space after the ~T. The text will start on the card where the ~T begins.
3 Creating a Fluorescent Image: In a separate drawing program, create the image that you
wish to fluoresce.
April 2014
DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 49