Technical Data - Leica DISTO X4 Instruction Manual

Technical data

T e c h n i c a l d a t a
General
Accuracy with favourable conditions *
Accuracy with unfavourable conditions **
Range with favourable conditions *
Range with unfavourable conditions **
Smallest unit displayed
X-Range Power Technology
Laser class
Laser type
ø laser point | at distances
Tilt measuring tolerance to laser beam ****
Tilt measuring tolerance to housing ****
Tilt measuring range ****
Protection class
Auto. laser switch off
Auto. power switch off
Bluetooth® Smart
Power of Bluetooth® Smart
Frequency of Bluetooth® Smart
Range of Bluetooth® Smart
Battery durability (2 x AA)
Dimension (H x D x W)
Weight (with batteries)
Temperature range Storage | Operation
* favourable conditions are: white and diffuse reflecting target (white painted wall), low background illu-
mination and moderate temperatures.
** unfavourable conditions are: targets with lower or higher reflectivity or high background illumination or
temperatures at the upper or lower end of the specified temperature range.
*** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%.
With favourable conditions the tolerance may deteriorate by 0.10 mm/m for distances above 10 m.
Leica DISTO™ X4
1 mm / 0.04" ***
2 mm / 0.08" ***
0.05 - 150m / 0.16 - 500ft ***
0.05 - 80m / 0.16 - 260ft ***
0.1 mm / 1/32 in
yes
2
635 nm, <1 mW
6 /30 /60 mm | 10/ 50/ 100 m
± 0.2°
± 0.2°
360°
IP65 (dust- and splash water protected)
after 90 s
after 180 s
Bluetooth® v4.0
0.71 mW
2400 - 2483.5 MHz
<10m
up to 4000 measurements
132 x 56 x 29 mm | 5.2 x 2.2 x 1.1 in
184 g/ 6.49 oz
-25 to 70°C/ -13 to 158°F | -10 to 50°C/ 14 to 122°F
With unfavourable conditions the tolerance may deteriorate by 0.15 mm/m for distances above 10 m.
**** after user calibration. Additional angle related deviation of +/-0.01° per degree up to +/-45° in each quad-
rant.
Applies at room temperature. For the whole operating temperature range the maximum deviation
increases by +/-0.1°.
4