Download
Share
Print this page
Leica DISTO X310 How To Use Manual
  1. Manuals
  2. Brands
  3. Leica Manuals
  4. Analytical Instruments
  5. Disto X310
  6. How to use manual

Leica DISTO X310 How To Use Manual

Hide thumbs Also See for DISTO X310:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
How to use
Leica DISTO™ X310
Basic operations
Other Operations on the device
Adjusting measuring reference/tripod
Disto X310 is provisioned to measure the distance from the front, back or the tripod thread
of the device.
 Each time the device is switched on, the display shows the default or the standard
mode as
which means that the distance is being measurement is from the back of
the device
You can further change the setting by pressing
Switch On and Off
 The red Dist on key displayed here switches on the instrument
and the laser in a single press.
 Pressing the Clear off button for 2 seconds switches the
instrument off. Also the instrument switches off automatically
after 3 minutes of inactivity.
 Beep on/off – Press
 Illumination on/off – Press
seconds.
 Keypad lock on/off – Press
seconds to lock the keypad. To unlock, press
after switching on the device or the device switches off on its own.
.
- Measurement from the front of the device or
- Measurement from the tripod thread of the device.
&
keys simultaneously for 2 seconds.
&
keys simultaneously for 2
&
keys simultaneously for 2
to adjust the mode to either
within 2 seconds

Advertisement

loading

Related Manuals for Leica DISTO X310

Summary of Contents for Leica DISTO X310

  • Page 1 Adjusting measuring reference/tripod Disto X310 is provisioned to measure the distance from the front, back or the tripod thread of the device.  Each time the device is switched on, the display shows the default or the standard...

  • Page 2: Changing Units

    10 results. Changing Units Leica Disto X310 is provided with the stock of units that you can change as per your requirement. You can change from meter to feet to inches as per your convenience.

  • Page 3: Basic Applications

    For measurements, where there is nothing obvious at the other end for the laser to reflect back, it is recommended that you use Leica branded Target plate. Permanent / Minimum-Maximum measurement This function enables determining the minimum or maximum distance from a specific measuring point, e.g.

  • Page 4: Area Measurement

    Area Measurement Area measurement is a basic function provided in all Leica Disto devices. This helps you calculate the area of wall or surface just by measuring its sides from the same reference point.

  • Page 5: Smart Horizontal Mode

    Triangular Area Measurement  For measuring the area of a triangular surface, press the Function thrice and you reach the triangular area measurement application  This is quite similar to previous area and volume measurement functions. Measure all three sides of a triangular area aiming lasers at 1 and 3 target points pressing...
  • Page 6 2 point Indirect Height measurement – With Disto X310, you can measure the height of a building/object with the Pythagorean method. This function helps when you do not have direct access to the building for straight line measurements. This function is used to measure the height of an object or a building just by focusing on 2 points (the distance from the object/building &...
  • Page 7 Partial Height measurement – Disto X310 provides you with the application of measuring partial length of an object/building at certain height from the ground.  To do so, press the Fucnction key 5 times and reach the application on the display.