Ch. 2. Alarm Conditions; Introduction; In This Chapter - Simplex 4010ES Operator's Manual

Introduction

An alarm condition occurs when an initiating device (such as a manual pull station, smoke detector,
etc.) activates. The 4010ES indicates the presence of the alarm condition through messages it
displays on the alphanumeric display, by flashing the ALARM indicator, and by activating the
building's notification appliances (horns and strobes).
Note:

In this Chapter

Refer to the page number listed in this table for information on a specific topic.
Chapter 2
Alarm Conditions
An alarm condition is a serious event, indicating the possibility of fire danger.In addition to
using the 4010ES operator interface panel to investigate and manage alarm conditions as
described in this chapter, you should also be aware of any facility-specific procedures that
you may be required to follow.
Acknowledging an Alarm
Silencing an Alarm
Resetting the System
Disabling a Point that Remains in Alarm
Topic
2-1
See Page #
2-2
2-5
2-6
2-8