Setting Operating Frequency And Base Station Id - Motorola PMP 320 Administration And Configuration Manual

Setting operating frequency and base station ID

Setting operating frequency and base station ID
Use the following procedure to set the operating frequencies and base station identification
numbers.
Procedure 4-1 Configure the AP RF Parameter
1
2
3
4
5
4-2
Log in to the AP GUI. Refer to
Select Configuration > Air Interface > WiMAX Capabilities from the
Configuration menu.
Configure the Access Point BSID with the MAC address of the AP.
Configure the Center frequency.
Click Update to configure the AP.
Chapter 4: AP RF Parameter Configuration
Procedure 2-1 Accessing the AP GUI
.
MAR 2010