Setting up the CSM for AAA Authentication
Modifying the Default Service Flows
The AP uses the default parameters to create service flows. By default, the QoS profile 0 and 1
are configured as the default parameters. The Default DL QoS Profile parameters can be
modified and changed to other QoS profile index values.
Procedure 7-2 Changing default QoS parameters
1
2
3
4
Adding a Classification Rule Profile
Use the following procedure to add classification profiles.
Procedure 7-3 Adding classification profiles
1
2
7-4
Log in to the AP GUI; refer to the
Select Configuration > Service Flows > QoS Profiles > Default Parameters
from the navigation pane.
Modify the Default DL or UL QoS Profile value as required.
Click Update to complete the change.
Log in to the AP GUI; refer to the
Select Configuration > Service Flows > Classification Rules from the navigation
pane.
Chapter 7: Quality of Service (QoS) Configuration
Procedure 2-2 Logging in to the AP GUI
Procedure 2-2 Logging in to the AP GUI
.
.
MAR 2010