Motorola PMP 320 Administration And Configuration Manual page 37

PMP 320 Administration and Configuration Guide
4
5
6
7
MAR 2010
In the DHCP Client drop down box select enable, then click Update.
In the top right corner hit the disc icon to save the configuration. The disc changes to
blue indicating that a configuration save is required
Following the configuration save, the icon on the right will change to yellow indicating
that a reboot is required. Click on the icon to reboot the radio.
The DHCP server address is displayed in the DHCP Relay information on the AP
Configuration GUI.
Configure the DHCP server address in the DHCP Relay configuration.
Select Configuration > DHCP Server > DHCP Relay on the Configuration screen.
Enter the external DHCP server IP address in the Relay Server IP Address box.
x
Generally after configuration changes a reboot is
necessary, the icon on the top right of the window will
change from blue to yellow indicating a reboot is necessary
after updates are saved.
x
Whenever updating the IP addresses, ensure that a valid IP
address and subnet mask are entered in the format of <IP
Address>/<subnet mask>, for example 192.168.2.10/24. If
the subnet mask is not included, the AP may become
inaccessible.
AP User Accounts
3-3