North Bridge - Supermicro SuperServer E50-9AP User Manual

SuperServer E50-9AP User's Manual
Chipset

Warning: Setting the wrong values in the following sections may cause the system to malfunc-
tion.

North Bridge


Memory Information
Memory Slot0 - 8192 MB (LPDDR3)
Max TOLUD
This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable
DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and
TSEG, respectively, if these devices are enabled. The options are 2 GB, 2.25 GB, 2.5 GB,
2.75 GB, and 3 GB.
Graphics Configuration
GOP Driver
The Graphics Output Protocol (GOP) driver is a replacement for legacy video BIOS that
accesses UEFI protocols. The options are Enable and Disable.
LVDS Panel Support
Use this feature to select the supported IGFX graphics device ouput to the LVDS panel.
The options are Disabled and Enabled.
Panel Support
Use this feature to select the panel voltage type. The options are Disable, G104SN03
V.5, G150XTN3.2, AU0_G170EG01_V1, G220SVN01.0, and AU0_G173HW01_v0.
IGD Configuration
Integrate Graphics Device
When enabled, the onboard graphics device will be used as the primary video display. The
options are Disable and Enable.
Primary Display
Use this feature to select the primary video display. The options are IGD and PCIe.
RC6 (Render Standby)
Select Enabled to enable render standby support. This is a power saving feature for the
onboard display that reduces power consumption. The options are Disable and Enable.
44