Table of Contents
Advertisement
S
S
UPER
ERVER 6018R-TD User's Manual
Enhanced Halt State (C1E)
Select Enable to use Enhanced Halt-State technology, which will significantly
reduce CPU power consumption by reducing CPU clock cycle and voltage during
a halt-state. The options are Disable and Enable.
CPU T-State Control (Available when Power Technology
is set to Custom)
ACPI (Advanced Configuration Power Interface) T-States
Select Enable to support CPU throttling by the operating system to reduce power
consumption. The options are Disable and Enable.
Chipset Configuration
North Bridge
This feature allows the user to configure the settings for Intel North Bridge.
IIO Configuration
EV DFX (Device Function On-Hide) Features
When this feature is set to Enable, the EV_DFX Lock bits that are located on a
processor will always remain clear during electric tuning. The options are Dis-
able and Enable.
IIO1 Configuration
CPU1 SLOT5 PCI-E 3.0 x8
Use this feature to set the PCI-E bus speed for the slot specified above. The
options are Gen (Generation) 1 (2.5 GT/s), Gen (Generation) 2 (5 GT/s), and
Gen (Generation) 3 (8 GT/s).
CPU1 SLOT6 PCI-E 3.0 x8
Use this feature to set the PCI-E bus speed for the slot specified above. The
options are Gen (Generation) 1 (2.5 GT/s), Gen (Generation) 2 (5 GT/s), and
Gen (Generation) 3 (8 GT/s).
7-10
CPU1 SLOT4 PCI-E 3.0 x8
Use this feature to set the PCI-E bus speed for the slot specified above. The
options are Gen (Generation) 1 (2.5 GT/s), Gen (Generation) 2 (5 GT/s), and
Gen (Generation) 3 (8 GT/s).
IIO2 Configuration
CPU2 SLOT7 PCI-E 3.0 x8
Use this feature to set the PCI-E bus speed for the slot specified above. The
options are Gen (Generation) 1 (2.5 GT/s), Gen (Generation) 2 (5 GT/s), and
Gen (Generation) 3 (8 GT/s).
IOAT Configuration
Enable IOAT (I/O Acceleration Technology)
Select Enable to enable Intel I/OAT (I/O Acceleration Technology), which signifi-
cantly reduces CPU overhead by leveraging CPU architectural improvements
and freeing the system resource for other tasks. The options are Disable and
Enable.
No Snoop
Select Enable to support no-snoop mode for each CB device. The options are
Disable and Enable.
Relaxed Ordering
Select Enable for relaxed ordering support, which will allow certain transactions
to be processed and completed prior to other transactions that have already
been queued and that violate the strict ordering rules of PCI processing. The
options are Disable and Enable.
Intel VT for Directed I/O (VT-d)
Intel
VT for Directed I/O (VT-d)
®
Select Enable to enable Intel Virtualization Technology to support Direct I/O VT-d
Technology by reporting the I/O device assignments to the VMM (Virtual Machine
Monitor) through the DMAR ACPI tables. This feature offers fully protected I/O
resource-sharing across Intel platforms, providing greater reliability, security, and
availability in networking and data-sharing. The options are Enable and Disable.
7-11
Chapter 7: BIOS
Advertisement
Table of Contents
