Moxa Technologies MC-7270-DC-CP-T Series Quick Installation Manual

MC-7270-DC-CP-T Series

Quick Installation Guide

First Edition, July 2015
Overview
The MC-7270-DC-CP-T computer uses the Intel
and comes with 4 serial ports, 4 Gigabit Ethernet ports, and 6 USB
hosts. The computer offers high performance and versatile
peripherals for industrial applications.
Package Checklist
Before installing the MC-7270-DC-CP-T, verify that the package
contains the following items:
• 1 MC-7270-DC-CP-T embedded computer
• 1 2-pin terminal block for DC power input
• 1 2-pin terminal block for power ON/OFF switch
• Hard disk installation kit
• Documentation and driver CD
• Quick installation guide (printed)
• Warranty card
NOTE: Please notify your sales representative if any of the
above items are missing or damaged.
MC-7270-DC-CP-T Panel Layout
The following figures show the panel layouts of the
MC-7270-DC-CP-T.
MC-7270-DC-CP-T Front View
P/N: 1802072700010
– 1 –
MC-7270-DC-CP-T Rear View
® ™
Core CPU processor
LED Indicators
The following table describes the LED indicators located on the
front panel and the LAN ports of the MC-7270-DC-CP-T.
LED Name
Power (on
the front
panel)
Storage (on
the front
panel)
LAN (on
each LAN
port)
Installing the MC-7270-DC-CP-T
Wall or Cabinet Mounting
The MC-7270-DC-CP-T comes with two brackets pre-installed on
both ends of the computer. Use two screws per side to attach the
MC-7270-DC-CP-T to a wall or cabinet. We recommend using size
M4 or larger screws.
LED Color LED Function
Green Power is on and functioning normally
Off Power is off or power error exists
Red (on) HDD/SSD card is inserted and
detected
Red (blinking) HDD/SSD card is reading/writing
Off No activity
Green 100 Mbps Ethernet mode
Yellow 1000 Mbps (Gigabit) Ethernet mode
Off No activity or 10 Mbps Ethernet mode
– 2 –
Restricted Access Location
This equipment is intended to be used in restricted access
locations, such as a computer room, with access limited to
service personnel or users who have been instructed on
how to handle the metal chassis of equipment that is so hot
that special protection may be needed before touching it.
The location should only be accessible with a key or
through a security identity system.
WARNING
External metal parts of this equipment are extremely hot!
Before touching the equipment, you must take special
precautions to protect your hands and body from serious
injury.

Connector Description

Power Connector
The MC-7270-DC-CP-T model has a 24 VDC power input (via the
terminal block). If power is supplied properly, the Power LED will
light up. The OS is ready when the Ready LED is a steady green.
Grounding the MC-7270-DC-CP-T
Proper grounding and wire routing help limit the effects of noise
from electromagnetic interference (EMI). Run the ground
connection from the ground screw to the grounding surface prior to
connecting the power. There is a ground symbol next to the
connector. Connect the ground wire to an appropriate grounded
metal surface.
ATTENTION
This product is intended to be mounted on a well-grounded
mounting surface, such as a metal panel.
VGA and DVI-D Outputs
The MC-7270-DC-CP-T comes with a DB-15 female connector on
the rear panel to connect a VGA monitor, and has two DVI-D
connectors on the rear panel to connect displays over a Digital
Visual Interface.
– 3 –