Setup/Email Alerts Page - Mitsubishi Electric Netcom 2 User Manual

Mitsubishi Netcom User Manual

7.16 Setup/Email Alerts Page

Figure 18 Setup/Email Alerts
In the Setup/Email Alerts there are 10 email addresses that the UPS events can be
directed to. The Netcom can send email or alphanumeric pages when a UPS event occurs.
The Netcom uses your local email server to send the email/page. You must set the
following values (contact your network administer if you are unsure as to the values to
use).
-The SMTP relay server: enter the IP address of the local email server. The Netcom will
use this server to send the email/page
-The From Address: is the information that will appear in the subject line of the email
sent by the Netcom.
Rev 3 02/24/2009
22