Mitsubishi Electric Netcom 2 User Manual page 36

Mitsubishi Netcom User Manual
upsIdentAgentSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS agent software version.
not have the same value as upsIdentUPSSoftwareVersion in
some implementations."
::= { upsIdent 4 }
upsIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string identifying the UPS.
set by the administrator."
::= { upsIdent 5 }
upsIdentAttachedDevices OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string identifying the devices attached to the output
of the UPS.
administrator."
::= { upsIdent 6 }
upsBattery OBJECT IDENTIFIER ::= { MitsubishiUPS 2 }
upsBatteryStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
batteryNormal(2),
batteryLow(3),
batteryDepleted(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The indication of the capacity remaining in the UPS
batteries.
A value of batteryNormal indicates a normal battery
condition.
A value of batteryLow indicates the remaining battery run-
time
will not maintain the output load for an extended period of
time.
A value of batteryDepleted indicates that the UPS will be
unable
to sustain the present load when and if the utility power
is lost."
::= { upsBattery 1 }
Rev 3 02/24/2009
This object should be set by the
34
This variable may or may
This object should be