Mitsubishi Electric Netcom 2 User Manual page 55

Mitsubishi Netcom User Manual
upsConfigHighVoltageTransferPoint OBJECT-TYPE
SYNTAX NonNegativeInteger
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum line voltage (RMS Volts) allowed before the UPS
system transfers to battery backup."
::= { upsConfig
-- UPS trap information group
upsTrapInfo OBJECT IDENTIFIER ::= { MitsubishiUPS 10 }
trapCode OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A number identifying the event for that last trap that was
sent."
::= { upsTrapInfo 1 }
trapDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string identifying the event for that last trap that was
sent."
::= { upsTrapInfo 2 }
-- UPS Traps
-- upsTraps OBJECT IDENTIFIER ::= { Tag 101 }
alarmCritical TRAP-TYPE
ENTERPRISE MitsubishiUPS
VARIABLES { trapCode, trapDescription }
DESCRIPTION
"Critical alarm."
::= 1
alarmWarning TRAP-TYPE
ENTERPRISE MitsubishiUPS
VARIABLES { trapCode, trapDescription }
DESCRIPTION
"Warning alarm."
::= 2
alarmInformation TRAP-TYPE
ENTERPRISE MitsubishiUPS
VARIABLES { trapCode, trapDescription }
DESCRIPTION
"Information alarm."
::= 3
upsAlarmCleared TRAP-TYPE
ENTERPRISE MitsubishiUPS
VARIABLES { trapCode, trapDescription }
Rev 3 02/24/2009
-- UNITS RMS Volts
10 }
53