Specifications - Datavideo TLM-702HD Instruction Manual

Specifications

2x HD/SD-SDI input (SMPTE 272M-C 1.5Gbps, 270Mbps with Embedded
Audio)
2x Component Y.U.V Sony Betacam Specification
Interface
2x CV input
2x HDMI input
2x D-Sub 15 Pin Plug (Tally Light Signal)
SDI/HD-SDI Specifications
Standard
Connector BNC (IEC 169-8)
HD/SD-SDI Impedance 75 Ω
Spec Return Loss HD
Equalization 200 m Belden 8281 cable at 270 Mbps;
Bandwidth: > 5.0MHz
Differential of Gain (DG) ＜3％
CV Spec
Differential of Phase (DP) ＜3°
S/N: > 50 dB
Bandwidth: > 5.2MHz
Differential of Gain (DG) ＜3％
YUV Spec
S/N: > 50 dB
HDMI Supports HDMI 1.1
Operating
0°C to 40°C (32°F to 102°F)
Temperature
Humidity 10% to 90% (non condensing)
Dimensions &
485mm (W) x 135mm (H) x 75mm (D) / 2.2Kgs
Weight
Power
DC 12V / 1.5A (16W)
SMPTE 259M-C (270Mbps - 525/625 Component Video) and SMPTE
292M (1.485/1.001 Gbps)
> 15 dB (5 MHz to 750 MHz)
> 10 dB (750 MHz to 1.5 GHz)
SD > 15 dB (5 MHz to 270 MHz)
100 m (typical) of Belden 1694A at 1.485 Gbps.
13