Advance - Datavideo TLM-702HD Instruction Manual

button to display the OSD Blending setting position.
- Press the
ENTER
- Press the or
UP DOWN
NB: OSD Blending value 0 = Min transparency 7 = Max transparency
- Press the button to save the OSD blending value.
ENTER
- Press the or
UP DOWN
button to toggle the on screen Time Code display ON/OFF.
- Press the
ENTER
- Press the or
UP DOWN
NB: TC Position is used to set where on the monitor Time Code will be shown.
- Press the button to cycle through the possible Time Code Positions on the monitor (Left/Up,
ENTER
Middle/Down, Right/Down, Right/Up)
- Press the or
UP DOWN
- Press button to cycle through the possible HD time code lines (8~20).
ENTER
- Press the or
UP DOWN
- Press button to cycle through the possible SD time code lines (10~21).
ENTER
- Press the or
UP DOWN
- Press button to cycle through the possible time code font sizes on the screen (Large or Small).
ENTER
- Keep pressing the
- Press the
SOURCE

Advance

- Press the button five times to display the Advance setting menu.
MENU
- Press the button to highlight the LCD L/R Scan setting.
ENTER
NB: The LCD L/R Scan will reverse the image displayed horizontally.
- Press the button, the screen image will be reversed (Left to Right).
ENTER
- Press the button again, the screen image will return to normal view.
ENTER
- Press / button to highlight the LCD U/D Scan setting.
UP DOWN
NB: The LCD U/D Scan will reverse the image displayed vertically.
- Press the button, the screen image will be reversed (Top to Bottom).
ENTER
- Press the button again, the screen image will return to normal view.
ENTER
- Press / button to highlight the Reset option.
UP DOWN
NB: This option will return the monitor to the factory default settings.
- Press the button to re-start the monitor with the factory default settings.
ENTER
- Press / button to highlight the Version setting.
UP DOWN
- Press the button, the firmware version will be displayed on screen.
ENTER
- Keep pressing the
- Press the
SOURCE
button to select the OSD blending value (from 0~7).
button to highlight the Time Code setting.
button to highlight the TC Position setting.
button to highlight the TC HD Line setting.
button to highlight the TC SD Line setting.
button to highlight the TC Font Size setting.
button to cycle through the main menu options.
MENU
button to exit the menu mode.
button to cycle through the main menu options.
MENU
button to exit the menu mode.
11