Battery Indicator; Application Software - Panasonic Toughbook CF-07 Series Reference Manual

Dealing with Problems (Advanced)

Battery Indicator

The red indicator lights.
Repeated beeping sound
while the computer is in
use.
The red indicator blinks
The orange indicator
blinks
T h e g r e e n i n d i c a t o r
blinks
Character Input
Only capital letters are
being input
How to input European
characters (ß, à, ç), sym-
bols or Euro Currency
Symbol is unclear
Setup Utility
[Enter Password] is dis-
played
[Advanced] menu can
not be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work

Application Software

Computer hangs
Unable to install
Network
Unable to connect to a
network
Sound
The computer produces
a strange sound
The battery level is low. Save your data and power off your computer.
After connecting the AC adaptor or replacing the battery pack with a fully charged
one, turn your computer on.
The battery pack or recharging function may be defective. Quickly remove the
battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support.
Unable to charge because of an improper temperature range. (
tions")
Battery is discharging to prescribed charging level in high temperature mode.
If CapsLock is on, the Caps Lock function is ON. To switch it OFF, press
Caps Lock .
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map].
The Character Map will be displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
After shutting down by pressing the power switch for more than four seconds, press
the power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel] -
[Add/Remove Programs] to delete the program. Then, reinstall the program.
Install the software after powering off the computer and the wireless display and then
connecting the port replicator, optional USB floppy disk drive, external keyboard and
external display.
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking your
system administrator or the person in charge of the network.
If the standby or hibernation mode is entered, the computer may have to be restarted.
If the computer has not been used for a long period of time, it may produce an un-
usual sound at start up. The sound may continue for a short period of time, but if the
computer starts up in a normal manner, then the problem is not serious. If, however,
the computer fails to start up, contact Panasonic Technical Support.
40
"Precau-