Panasonic Toughbook CF-07 Series Reference Manual page 4

Standby/Hibernation Functions
Shutting Down Using the Standby or Hibernation Function
The computer should be set for standby or hibernation (
Press the power switch; at the "beep" sound, release your finger.
When [PC in standby] is displayed on the wireless display, select [OK].
The wireless display will power off.
(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes off
or blinks.)
CAUTION
At the "beep" sound, release your finger from the power switch. If you continue to
press down on the switch and hold it for more than four seconds, the unit will emit a
second "beep" then power off. Data not previously saved will be lost.
Even when [When I press the power button on my computer] is set to [Shutdown]*
with [Control Panel] - [Power Management]*
will sound and the power will go off if the switch is pressed for more than four sec-
onds, although the computer will not completely shut down.
* Windows 2000 : [Power Off]
1
* Windows 2000 : [Power Options]
2
NOTE
With the method below, you can shut down the computer by using the standby
function.
• In [Start] - [Shut Down], select [Stand by].
Windows 2000
With the method below, you can shut down the computer by using the hiberna-
tion function.
• In [Start] - [Shut Down], select [Hibernate].
page 3).
Standby Mode
or
Hibernation Mode
, if the power switch is pressed, a beep
2
4
1