Panasonic Toughbook CF-07 Series Reference Manual page 20

CD-ROM Drive
Setting a Disc
Title-side up
Center Holder
Eject Button
Using the CD-ROM drive in the MS-DOS mode
<Only when the port replicator is connected>
1
Turn on your computer
2
Press the disc eject button and slowly pull out the tray
3
Place the disc securely on the center holder
4
Close the tray
CAUTION
Do not apply excessive force to the tray in the open position, doing so could
damage the tray.
NOTE
Use the external display for operations.
1
Select [Start] - [Shut Down].
2
Select [Restart in MS-DOS mode], then select [OK].
3
Open the "CONFIG.SYS" file for editing by issuing the following commands:
cd \ Enter
edit config.sys Enter
4
Move the cursor to the line containing "OAKCDROM.SYS", and delete the charac-
ters "rem" at the beginning of the line. (Deleting "rem" causes the item to become
valid.)
DEVICEHIGH=C:\WINDOWS\COMMAND\OAKCDROM.SYS /D:MSCD000
(If this line is missing, add it.)
5
Press Alt + F , then S to save the file. Then press Alt
to exit the Edit program.
6
Follow the same steps to edit the "AUTOEXEC.BAT" file.
edit autoexec.bat Enter
7
Move the cursor to the line containing "MSCDEX.EXE" and delete the characters
"rem" at the beginning of the line. (Deleting "rem" causes the item to become valid.)
LOADHIGH C:\WINDOWS\COMMAND\MSCDEX.EXE /D:MSCD000 /L:L
(If this line is missing, add it.)
8
Press Alt + F , then S to save the file. Then press Alt
to exit the Edit program.
9
Restart the computer.
Windows 98
+ F , then X
+ F , then X
20