Configurations (Standalone); Sound-Active Mode; Sound Sensitivity; Auto Mode - Chauvet EZ WEDGE Tri User Manual

Configurations
(Standalone)
Sound-Active
Mode

Sound Sensitivity

Auto Mode

Program Speed

Selecting the
Dimmer Mode
Page 16 of 22
Use standalone configurations to operate the product without a DMX controller. There are a
variety of Standalone modes and they are powerful tools for making exciting looks.
Never connect a product operating in a standalone mode (Sound-Active, Auto, or IR) to a
DMX chain that includes a DMX controller. Products in standalone mode can transmit
DMX signals that interfere with the DMX signals from the controller
Sound-Active mode sets the product to respond to sounds and music.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> and Snd1 (3-color) or Snd2 (7-color) shows on the display.
3. Use <UP> or <DOWN> to select the desired Sound-Active program.
4. Press <ENTER>.
To set the sound sensitivity, follow the instructions below:
Press <MENU> repeatedly until SenS shows on the display.
1.
Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100).
2.
Press <ENTER>.
3.
The product will respond only to low frequencies of music (bass and drums).
If the product is not responding to sound, increase the sensitivity.
Auto mode sets the product to 1 of 4 preset color changes.
To set the product to Auto mode, do the following:
Press <MENU> repeatedly until P-- shows on the display.
1.
Press <ENTER> and P 1–P 4 shows on the display.
2.
Use <UP> or <DOWN> to select the desired auto program:
3.
·
P 1 - 3-color snap
·
P 2 - 3-color fade
·
P 3 - 7-color snap
·
P 4 - 7-color fade
Press <ENTER>.
4.
To set the auto program speed, follow the instructions below:
Press <MENU> repeatedly until S-- shows on the display.
1.
Use <UP> or <DOWN> to select the desired auto program speed
2.
(S 1–S100, slow to fast).
Press <ENTER>.
3.
To select the dimmer mode, do the following:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER> and one of the following shows on the display:
·
OFF (dimmer speed off)
·
dIM1 (dimmer mode 1, fast speed)
·
dIM2 (dimmer mode 2, middle speed)
·
dIM3 (dimmer mode 3, slow speed)
3. Use <UP> or <DOWN> to select the desired dimmer mode.
Press <ENTER>.
4.
EZwedge™ Tri User Manual Rev. 1