Power Linking; Power Linking Diagram; Charging The Battery; Battery Run Time - Chauvet EZ WEDGE Tri User Manual

Power Linking

Power Linking
Diagram
Charging the
Battery
Battery Run
Time
EZwedge™ Tri User Manual Rev. 1
Daisy chaining products together through their Power In and Power Out sockets, called power
linking, allows many products to be powered from one power outlet. The product provides
power linking via the Edison/IEC outlet located in the back of the unit.
The diagram below illustrates the power-linking process.
Up to 33 EZwedge™ Tri products can be power linked at 120 V and up to
57 EZwedge™ Tri products can be power linked at 230 V.
If using this product anywhere other than North America, consult with the local Chauvet
distributor because power linking connectors and requirements differ from country to
country, and region to region
The EZwedge™ Tri comes with a rechargeable lithium battery for cable-free operation. To
charge the battery, simply plug in the external power cord at any time before, during, or after
operation. You can charge the battery with the LEDs off by leaving the power switch in the Off
position. The indicator light on the unit turns red while connected to power, green indicator turns
in when the battery is done charging.
For optimal battery life, charge the EZwedge™ Tri battery for 24 hours prior to initial use.
Maximum Run Time
(all colors on)
Up to 8 hours
st
1
nd
2
rd
3
Additional Products
Maximum Run Time
(single color on)
Up to 20 hours
Product
Product
Product
Recharge Time
6 hours
Page 9 of 22