Fisher Scientific accumet AR50 User Manual page 17

®
accumet
R E S E A R C H
The accumet Research AR50 is a Multi-channel pH meter. With this
meter you can switch from channel 1 to channel 2. You can also view
both channels at the same time by accessing the dual channel mode.
If you set the meter to view both channels, you cannot change the
parameters without choosing the screen that you want to modify. The
setup parameters for each screen are setup independently of one
another.
Choosing a Channel
1
Touch anywhere on the Standby screen.
OR
Touch channel on the main screen.
THEN
2
Touch 1, 2 or dual to access the channel that you want to view.
To access System Setup from the Standby screen
1
Touch anywhere on the Standby screen.
2
Touch 1 or 2 on the channel screen to access either channel.
3
Touch setup.
4
Touch system on the Setup screen.
CHOOSING A CHANNEL Using the Meter
If you are in any measure
mode, touch mode until
you access the main
screen.
17