Connecting The Modulator Module - Triax CGMM 480 Assembly Manual

• Insert the modulator module in grooves
right hand side of the associated digital module or an add-on module.
• Gently slide the modulator module into the head-end station and ensure that
it makes contact with the contact strip on the board at the rear wall of the
housing.
B
A
3.2 C
o n n e C t i n g
D
C
E
• Using the AV cable
or to an add-on module if applicable.
• After programming, connect the modulator output
sockets
• Close the locking device
t h e m o d u l ato r
C
, connect the modulator module to the digital module
on the output collector.
E
1
—> Ensure that the ground spring
and
A
m o d u l e
in the direction of the arrow.
gets contact to the locking device.
A
- 7 -
of an open slot on the
B
1
to one of the input
D
CGMM 480 / CGMS 480