Selecting The Audio Signal; Storing Data - Triax CGMM 480 Assembly Manual

• Use the
nel strip to the lower output levels of the other modulators used ("0 dB" ...
"–15 dB").
• Press the
s
e l e C t i n g
In this menu, you can select when using
– CGMS 480 between the audio settings "STEREO" or "DUAL" or when using
– CGMM 480 / OIRT between mono audio (Mono L) and the composite sig-
nal of the audio signals (Mono L + R).
• The
EO" or "DUAL", CGCGMM 480 / OIRT "Mono L" or "Mono L + R").
• Press the
s
to r i n g
• All programmed data is saved by pressing the
turned to the menu item "Selecting the module / channel strip" (page 12).
• Select additional channel strips for programming if necessary.
buttons to balance the higher output level of the one chan-
button.
—> The "Selecting the audio signal" – "AUDIO" menu is activated.
t h e au d i o s i g n a l
buttons are used to select the audio signal (CGMS 480 "STER-
button.
—> The "Storing data" – "MEMORY" menu is activated.
data
Bx 2A
—> By pressing the
"Selecting the module / channel strip" without saving the pro-
grammed data.
Bx 2A AUDIO
Stereo
MEMORY
S => STORE
button, you will be returned to the menu item
- 15 -
button. You will be re-
CGMM 480 / CGMS 480