Table of Contents
Advertisement
6
f
i n a l
After installing the head-end station, upgrading accessories or installing mod-
ules it is necessary to tighten all cable connections, cable terminals and cover
screws in order to maintain compliance with current EMC regulations.
• Securely tighten the cable connections (F connectors) using an open-ended
spanner (spanner gap 11 mm).
• After programming, connect the modulator output
sockets
• Test the output level of the output collector according to the CSE 2800 as-
sembly instructions and set the output level required for the cable system.
• Mount the base plate and the front cover (see CSE 2800 assembly instruc-
tions).
D
C
E
pro C e d u res
of the output collector.
E
- 16 -
to one of the input
D
1
CGMM 480 / CGMS 480
Advertisement
Table of Contents
