Setting The Output Frequency; Setting The Output Level - Triax CGMM 480 Assembly Manual

• Press the
• Use the
• Press the
s
e t t i n g
In this menu you set the output frequency of the channel strip.
• Use the
• Use the
• Press the
s
e t t i n g
This menu item is used to set the output levels of the modulators of the modul´s
channel strips to the same value and to level them to the output levels of the
modulators of other modules used.
• Use the test receiver to measure the output level of the channel strip and
make note of the value.
• When adjusting the other channel strip, compare its value with the value
noted for the first channel strip.
• Measure the output levels of the other modulators used and make notes of
their values.
button.
—> Pressing the
channel" menu.
buttons to adjust the fine tuning (Fine).
button.
—> The "Setting the output level" – "OUTPUT Level" menu is activated.
t h e o u t p u t f r e q u e n C y
buttons to select the digit to be set.
buttons to set the output frequency (table page 17).
button.
—> The "Setting the output level" – "OUTPUT Level" menu is activated.
t h e o u t p u t l e v e l
button you can return to the "Setting the output
Bx 2A OUTPUT
870.00
Bx 2A OUTPUT
Level 0 dB
- 14 - CGMM 480 / CGMS 480