Table of Contents
Advertisement
• Press the
s
e l e C t i n g
• Use the
"Freq." .
• Press the
s
e t t i n g
s
e t t i n g
In this menu you set the output channel of the channel strip. Additionally the
output frequency of the output channel can be fine tuned.
Setting the output channel
• Use the
Setting the fine tuning
Only change the fine tuning (frequency offset) in circumstances where it is
absolutely necessary to do so. Once you have changed it, all televisions con-
nected to the cable system will need to be calibrated by means of fine tuning
to match it.
button.
—> The "Selecting channel / frequency setting" – "OUTPUT Chan."
menu is activated.
/
C h a n n e l
f r e q u e n C y
buttons to select channel setting "Chan." or frequency setting
—> For OIRT modules select frequency setting and adjust the output fre-
quency according to the OIRT table on page 18.
button.
—> Depending on the setting the "Setting the output channel/fine tun-
ing" or the "Setting the output frequency" – "OUTPUT" menu is acti-
vated.
t h e
o u t p u t
C h a n n e l
t h e
f i n e
t u n i n g
Bx 2A
OUTPUT
C21
buttons to set the output channel.
s e t t i n g
Bx 2A
OUTPUT
Chan.
Bx 2A
/
C21
- 13 -
OUTPUT
Fine
0
CGMM 480 / CGMS 480
Advertisement
Table of Contents
