Selecting The Module / Channel Strip; Switching On The Modulator - Triax CGMM 480 Assembly Manual

s
e l e C t i n g
• Press
or channel strip "A", "B", "C" or "D" to be programmed.
• Press the
• Press the
s
w i tC h i n g
• Use the
page 9), or to switch "off" the modulator if necessary (LED is switched off).
—> In the "SETUP" menu, the output level of the output collector can be
adjusted (see CSE 2800 assembly instructions).
/
t h e m o d u l e C h a n n e l
repeatedly if necessary to select the particular module (Bx ...)
Bx 2A 4 AV STEREO
C21
—> " MONO" is shown instead of "STEREO" using CGMM 480.
button to activate the channel strip.
—> The display for example shows: "Bx 2A 4 AV STEREO C21 ":
"Bx"
"2"
"A"
"C21"
button:
—> The "Switching on the modulator" – "OUTPUT – Modulator" menu is
activated.
o n t h e m o d u l ato r
Bx 2A
Modulator
buttons to switch "on" the modulator (LED illuminates –
s t r i p
Bx 1A
Böx 4
Bx 2B 4 AV STEREO
C5-12,S3-24
C5-12,S3-24
indicates the slot
indicates slot no. 2
indicates channel strip "A"
indicates the RF channel set
OUTPUT
on
- 12 -
TWIN-SAT
TWIN-SAT
C07
C07
C23
CGMM 480 / CGMS 480