Programming The Modulator Module - Triax CGMM 480 Assembly Manual

5.3 p
r o g r a m m i n g
Notes:
– Entries are saved by pressing the
– The programming process can be cancelled by pressing and holding the
button.
• Switch on the head-end station.
To use ths CGMM 480 OIRT module the head-end station CSE 2800 must be set
to OIRT operation mode.
Therefore in the setup menu of the control unit
• press the
• Switch to standard "PAL DK" using the
• Press the
• Store the setting using the
To operate the CGMM 480 OIRT module the software version of the control unit
(head-end station) must be "V 10" or higher.
t h e m o d u l ato r
—> You will be returned to the item "Selecting the module/channel strip".
—> You will be returned to the item "Selecting the module/channel strip".
—> The display shows "SETUP BE160" and the software version of the
head-end station (e.g. V 10).
Ein/On
button twice.
—> The "Setting the Standard" - "NORM" menu is activated.
button.
—> The "Saving Data" - "MEMORY" menu is activated.
—> Always all modulator modules are set.
Mixed operation is not possible!
m o d u l e
button.
BE160
SETUP
V 10
button.
button.
- 11 - CGMM 480 / CGMS 480