Using The Default Setup - Check-line MINI-MAX Operation Manual

8) If both parameters will be edited, repeat steps 4 – 7.
9) Use the UP and DOWN arrow keys to scroll to and highlight SAVE
SETUP.
10) Press the ENTER key to activate the Setup List Box.
11) Use the UP and DOWN arrow keys to scroll through the setups until the
target location to save the Setup is highlighted.
12) Press the OK key to activate the confirmation screen.
13) Press the OK key to save the Setup, or ESC to cancel saving the
Setup.
14) Finally, press the MEAS key to return to the measurement screen.
Note: The Name and Comments of the Setup can be edited at any time
by simply repeating the Save Setup routine described above. Therefore,
the Save Setup function can also be considered an Edit Function.

15.4 Using the Default Setup

The default setup feature was added to the MINI-MAX to use, as a last resort, if
there are no setups stored in the gauge –factory or otherwise. The only time this
might possibly occur is if the setup file in the MINI-MAX was somehow corrupted,
and the user does not have access to a computer to re-load the factory setup
MINI-MAX Ultrasonic Bolt Tension Monitor