Download Print this page

Advertisement

Quick Links

7.0
WARRANTY
ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the
original purchaser that this product is of merchantable quality and confirms
in kind and quality with the descriptions and specifications thereof. Product
failure or malfunction arising out of any defect in workmanship or material in the
product existing at the time of delivery thereof which manifests itself within one
year from the sale of such product, shall be remedied by repair or replacement of
such product, at ELECTROMATIC's option, except where unauthorized repair,
disassembly, tampering, abuse or misapplication has taken place, as determined
by ELECTROMATIC. All returns for warranty or non-warranty repairs and/or
replacement must be authorized by ELECTROMATIC, in advance, with all
repacking and shipping expenses to the address below to be borne by the
purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS
FOR ANY PARTICULAR PURPOSE OR APPLICATION. ELECTROMATIC
SHALL NOT BE RESPONSIBLE NOR LIABLE FOR ANY CONSEQUEN-
TIAL DAMAGE, OF ANY KIND OR NATURE, RESULTING FROM THE USE
OF SUPPLIED EQUIPMENT, WHETHER SUCH DAMAGE OCCURS OR IS
DISCOVERED BEFORE, UPON OR AFTER REPLACEMENT OR REPAIR,
AND WHETHER OR NOT SUCH DAMAGE IS CAUSED BY
MANUFACTURER'S OR SUPPLIER'S NEGLIGENCE WITHIN ONE YEAR
FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation may not apply to
you. The duration of any implied warranty, including, without limitation, fitness
for any particular purpose and merchantability with respect to this product, is
limited to the duration of the foregoing warranty. Some states do not allow
limitations on how long an implied warranty lasts but, not withstanding, this
warranty, in the absence of such limitations, shall extend for one year from the
date of invoice.
ELECTROMATIC Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516—USA
Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399
Every precaution has been taken in the preparation of this manual. Electromatic Equipment Co., Inc.,
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of information contained herein. Any brand or product names mentioned herein are used for
identification purposes only, and are trademarks or registered trademarks of their respective holders.
-8-
C
1.0
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0
Charging the built-in battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.0
Operating procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.0
Verifying the calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.0
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.1 Specification
5.2 Available models
6.0
Service and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1 Rollers
6.2 Cleaning
6.3 Verification intervals
7.0
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tensions that exceed the tension range of the MKM instrument by
more than 100% may cause permanent damage to the movement
and must be avoided under any circumstances.
CAUTION
ONTENTS
-1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the MKM and is the answer not in the manual?

Questions and answers

Summary of Contents for Check-line MKM

  • Page 1 600 Oakland Ave. Cedarhurst, NY 11516—USA Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399 Tensions that exceed the tension range of the MKM instrument by more than 100% may cause permanent damage to the movement Every precaution has been taken in the preparation of this manual. Electromatic Equipment Co., Inc., assumes no responsibility for errors or omissions.
  • Page 2 12. Guide eye 6. Jack plug 3.5mm ø 13. Outer rollers 7. Battery charger 14. Measuring roller The MKM tension meter is shipped as a complete kit that includes the gauge, battery, battery charger and operating instructions in a hard plastic case.
  • Page 3 5.2 Available Models CAUTION Type Tension Measuring Calibration Range Hand Width Material MKM-50 5 - 50 PA: 0.12 mm Ø MKM-100 10 - 100 PA: 0.12 mm Ø MKM-400 50 - 400 PA: 0.20 mm Ø ** Suitable for 95% of applications. PA = Polyamide Monofilament If the material to be measured differs significantly from the factory calibration material in diameter, rigidity, shape, etc., we recommend calibration using customer...
  • Page 4 ROCEDURE ERIFYING THE ALIBRATION NOTE: To facilitate easy use, the MKM handle can be attached to the top or All tension meters are calibrated with standard materials—such as polyamide bottom of the gauge body (see diagram on page 2). monofilament (PA)— according the factory procedure. Filament sizes are noted in Section 5.2.
  • Page 5 ® CHECK LINE • BY ELECTROMATIC Model MKM ENSIONMETER ELECTROMATIC CHECK LINE ® • O ., 600 Oakland Ave., Cedarhurst, NY 11516–U.S.A. INSTRUMENTS • TEL: 516-295-4300 FAX: 516-295-4399 Operating Instructions...

This manual is also suitable for:

Mkm-50Mkm-100Mkm-400