Sola Diagnostics - FULTON EDR-1000 Installation And Operation Manual

SECTION 3
EDR-IOM-2014-0318
 SOLA Diagnostics
From the Status Summary screen (Figure 28), press Diagnostics.
FIGURE 28 - ACCESSING DIAGNOSTICS
Pressing Burner Control I/O will place you into the I/O Status screen (Figure 29).
From here you can see what the control is receiving from its inputs. A green light
next to the input indicates the control's input is made or satisfi ed. A gray circle
indicates the input is not satisfi ed. This is a helpful trouble shooting screen.
FIGURE 29 - BURNER CONTROL I/O
Pressing Digital I/O will place you into the Digital I/O screen (Figure 30). From
here you can see what the control is receiving from its inputs. A green light next
to the input indicates the control's input is made or satisfi ed. A gray circle
indicates the input is not satisfi ed. This is a helpful trouble shooting screen.
Questions? Please Contact Your Local Manufacturer's Representative
OPERATION
4
WARNING
Non-Fulton product information is for
reference purposes only. No Fulton
document may substitute for full
review of documentation available
from the component manufacturer.
Operating this equipment beyond
its design limits can damage the
equipment and can be dangerous.
Do not operate the equipment
outside of its limits. Do not try to
upgrade the equipment performance
through unapproved modifi cations.
Unapproved modifi cations may
cause injury, equipment damage, and
will void the warranty.
3-15