Using The Sc1000 Controller; Display Features; Using The Pop-Up Toolbar; Using The Menu Windows - Hach LDO User Manual

4.2 Using the sc1000 Controller

4.2.1 Display Features

4.2.1.1 Using the Pop-up Toolbar

Figure 8 Pop-up Toolbar Functions
–displays the Main Menu Structure
MAIN MENU
Arrow–scrolls up to the previous displayed value.
UP
1
Displays one value.
2 Displays two values at the same time.
4
Displays four values at the same time.
–displays the list of connected devices and sensors.
LIST
Arrow–scrolls down to the next displayed value.
DOWN

4.2.1.2 Using the Menu Windows

The sc1000 is a touch screen application. Use your finger to touch keys and menu
commands. In normal operation the touch screen displays the measured values for the
sensors selected.
The pop-up toolbar provides access to the controller and sensor settings. The toolbar is
normally hidden from view. To view the toolbar, touch the bottom-left of the screen.
If the Menu button (from the pop-up toolbar) is selected, the Main Menu screen is opened.
The Main Menu screen allows the user to view the sensor status, configure the sensor
setup, system setup, and perform diagnostics.
The menu structure may vary depending on the configuration of the system.
User Interface and Navigation
1 2 4
17