Table of Contents
Advertisement
Installation of the Eyepiece Tube
Attach the eyepiece tube to the upper surface of the zoom
body. The AZ-TE80 Ergonomic Trinocular Tube, the AZ-TE100
Ergonomic Trinocular tube 100, or the photo adapter for the
AZ-TP series are available for the zoom body.
1.
Sufficiently loosen the eyepiece tube clamp screw
on the right of the zoom body with the provided
hexagonal wrench.
2.
Align the circular dovetail joint on the lower part of
the eyepiece tube with the mounting location of the
zoom body with inclining the eyepiece tube to the
left, backward, and attach the eyepiece tube to the
zoom body.
Check that the eyepiece tube is attached horizontally.
3.
Tighten the eyepiece tube clamp screw to secure
the eyepiece tube.
Attaching Eyepieces
Attach the eyepieces to the binocular part of the eyepiece tube.
Insert the eyepieces as far as they go.
Firmly hold the rubber cover base when inserting an
eyepiece. Insertion with grasping the diopter adjustment ring
may result in malfunctions.
Attaching the Photographic Device (Option)
Use the optional C-mount direct TV adapter to attach a
photographic device, such as a digital camera for microscope,
to the vertical tube of the eyepiece tube. Attach the
photographic device according to the following procedure.
1.
Attach the C-mount direct TV adapter to the
photographic device such as a digital camera for
microscope.
For details on installation , see the instruction manual for
the photographic device.
2.
Sufficiently loosen the clamp screw on the vertical
tube with the provided hexagonal wrench.
3.
Remove the protective cap from the vertical tube.
4.
Insert the C-mount direct TV adapter to the vertical
tube as far as it goes.
5.
Tighten the clamp screw on the vertical tube and
secure the adapter.
A C-mount adapter embedding a lens such as 0.7x or 0.55x
cannot be used for the product.
Chapter 4 Aseembly
Photographic device
21
Eyepiece tube
Mounting
location
ON
OFF
CLIC K
Eyepiece tube installation
Attaching eyepieces
(ex. DS-Fi1)
C-mount direct
TV adapter
Attaching the Photographic device
Place the tube on the
mounting location with
aligning the circular
dovetail joint and secure
it with the clamp screw.
Eyepiece tube
clamp screw
Attach the adapter
to the Photographic
device
Insert the adapter
as far as it goes
and secure it with
a clamp screw.
Advertisement
Table of Contents
Troubleshooting
