Advertisement
Elcometer 456
Dry Film Thickness -
Dry Film Thickness is probably the most critical measurement in the coatings industry. It provides
vital information as to the expected life of the substrate, the product's fitness for purpose, its
appearance and ensures compliance with a host of International Standards.
• Integral and Separate gauges available
• Ferrous, Non-Ferrous, Ferrous – Non-Ferrous dual gauges available
• Dust and water resistant rugged design equivalent to IP64
• Fast reading rate of more than 70 readings per minute
• USB and Bluetooth® data output to ElcoMaster™ 2.0 software suite of products
• Calibration Test Certificate comes with Gauges
Integral Model Options ( Built in Probe )
Range: 0-1500μm (0-60mils) Accuracy*: ±1-3% or ±2.5μm (±0.1mil)
Scale 1
Elcometer 456 Ferrous Integral
Elcometer 456 Non-Ferrous Integral
Elcometer 456 Dual FNF Integral
Range: 0-5mm (0-200mils) Accuracy*: ±1-3% or ±20μm (±1.0mil)
Scale 2
For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance
Elcometer 456 Ferrous Integral
Scale 3
Range: 0-13mm (0-500mils) Accuracy*: ±1-3% or ±50μm (±2.0mils)
Elcometer 456 Ferrous Integral
Digital DFT Gauge
Model E
A456CFEI1
N/A
A456CFNFEI1 A456CFNFBI1 A456CFNFSI1 A456CFNFTI1
Model E
-
Model E
Model B
Model S
A456CFBI1
A456CFSI1
A456CNBI1
See separate gauges with N2 PINIP™ Probe
Model B
Model S
A456CFBI2
See separate gauges with F2 PINIP™ Probe
Model B
Model S
A456CFBI3
See separate gauges with F3 PINIP™ Probe
Model T
A456CFTI1
Model T
Model T
5
Advertisement
