Testex® Replica Tape
Testex Tape consists of foam with a non-compressible backing.
The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile
Testex Tape is available in three profile ranges.
There are 50 tests in each roll. Test Area Dimensions: 19 x 54mm (0.75 x 2.23")
Part Number
TESC
TESXC
TESXC PLUS
TESBT
TESGMET
PHCAL-GMET/7301
Thickness Gauge - GMET
The Mitutoyo Thickness Gauge is used to measure the peak-to-valley height
of a surface profile moulded in the Testex Replica Tape.
• Metric only available
• Quick and easy to use
• Calibration Certificates available at extra cost
Surface Profile Testing
Metric Range
Coarse 20 - 64μm
X-Coarse 38 - 115μm
X-Coarse Plus 116 - 147μm
Burnishing Tool ( needed to leave impression )
Testex Metric Dial Thickness Gauge ( microns)
Calibration Certificate for Testex Dial Gauge
cont.
3