3-1-8. Backup Battery
1. Lift the control panel
compartment cover
2. Remove the old battery, if necessary.
Connect the new battery to the clips.
Samsung Electronics
(SF3000T only)
and open the cartridge
.
3. Insert the battery into the battery slot.
The battery maintains setup configuration and
messages when a power failure occurs or when
power is accidentally disconnected.
We recommend you use an alkaline battery
because it lasts longer than a conventional
battery.
4. Close the cartridge compartment cover, and close
the control panel.
The battery can maintain the internal memory for
about 20 hours. If the backup battery is weak or
missing, the LCD displays a warning message.
Installation
3-3