Samsung SF3000 Service Manual page 25

Disassembly and Reassembly
6-13-3. Base Frame Assembly
1. Before disassembling the base frame assembly,
you should remove:
Ð Dummy ASF (see page 6-2)
Ð Rear Cover (see page 6-2)
Ð Top Cover (see page 6-3)
Ð Printer Unit (see page 6-11)
Ð Cartridge Carrier Home Assembly
(see page 6-13)
Ð Cartridge Carrier Assembly (see page 6-13)
Ð ASF Feeder (see page 6-12)
Ð Main Board (see page 6-15)
2. Remove the roller friction assemblies, then the
actuator feed.
3. Remove the base frame assembly.
Holdr Roller
6-14
6-13-4. Feed Roller Assembly and Line
1. Before disassembling the feeder roller assÕy,
and/or the line feed bracket assÕy, you should
remove:
Ð Dummy ASF (see page 6-2)
Ð Rear Cover (see page 6-2)
Ð Top Cover (see page 6-3)
Ð Printer Unit (see page 6-11)
Ð Cartridge Carrier Home Assembly
Ð Cartridge Carrier Assembly (see page 6-13)
Ð Base Frame Assembly (see page left)
2. Remove the feed bearing from the main frame.
Pull the feeder roller in the direction of arrow,
and take it out.
3. Remove the two screws, then remove the feeder
bracket assembly.
Roller friction assÕy
Base frame assÕy
Feeder Bracket Assembly
(see page 6-13)
Samsung Electronics