Disassembly and Reassembly
6-12. ASF Feeder
1. Before disassembling the ASF feeder assÕy, you
should remove:
Ð Dummy ASF (see page 6-2)
Ð Rear Cover (see page 6-2)
2. Remove the two screws securing the ASF feeder.
3. Unlock the ASF feeder assembly, and remove it.
6-12
4. Remove the screw securing the pickup shaft. To
remove the pickup shaft, pull it to the far right
and take it out.
Note : When reassembling the ASF feeder assÕy,
insure the harness for the line feed motor is
not pinched or shorted.
Pickup shaft
Samsung Electronics