Samsung SF3000 Service Manual page 15

Disassembly and Reassembly
6-5. Scan Motor
1. Before disassembling the scan motor, you should
remove:
Ð Rear Cover (see page 6-2)
Ð Top Cover (see page 6-3)
2. Unplug the motor connector from the main
board. Make sure the harness is released from the
two hooks, as shown below.
3. Remove the two screws as shown below.
6-4
4. Remove the ground plate.
Ground plate
5. Remove the ground screw securing the motor to
the motor bracket.
Samsung Electronics