Table of Contents
Advertisement
3-3. Installing Print Cartridge
When the machine is powered up without the print cartridge installed, the LCD displays ÔNO CARTRIDGE Õ.
1. Press Menu.
¹ or
2. Press
until Ô1.CHANGE CART.Õ is
displayed, then press Start/Copy.
3. Lift the control panel
compartment cover
Cartridge compartment cover
Control panel
4. Remove the new print cartridge from its
packaging. Hold by the black areas or colored
top only. Do not touch the copper area.
5. Carefully remove the tape covering the
printhead. Be sure to remove all the tape.
Samsung Electronics
, and open the cartridge
.
copper area
6. Insert the print cartridge in the carrier.
7. Push the cartridge firmly in the direction of the
arrow until it clicks into place.
8. After installing the print cartridge, close the
cover and replace the control panel.
9. The display shows Ô:NEW :USED.Õ Press
Start/Copy to confirm ÔNEWÕ. (For used
cartridge, press ¹ or
The display briefly shows ÔMONO INSTALLED.Õ
If the cartridge is not installed properly, ÔNO
CARTRIDGEÕ is displayed. Remove the cartridge
and re-insert it.
10. The display asks if you want to run a SELF
TEST. Press Start/Copy to run the printer self
test.
If you press Stop, the machine returns to
Standby mode.
11. The machine prints out a test pattern of the
printer.
Installation
then press Start/Copy.)
3-5
Advertisement
Table of Contents
