Select Ring (And Ringer Volume) - AT&T Definity 7406 Plus User Manual

Select Ring (and Ringer Volume)

To select a personalized
ring
To adjust ringer volume
if necessary (speaker is
not active)
1 Press [ ]
Select
Green light goes steadily
2 Press [ ]
Conference Ring
Green light next to [
Current ring pattern plays and repeats every 4
seconds
If you have a display, it shows
[
PERSONAL RING #x
1 to 8)
3 Continue to press [
Conference Ring
ring patterns
4
When you hear the desired ring pattern, press
[ ] again
Select
Your new ring is set; light next to [
Note: If you receive a call, go off-hook, or lose power
during selection, the process is interrupted and you
must start again.
1 To raise the volume, press the right half of the
Volume control button labeled [ ∧ ] ;
to lower the volume, press the left half of the Volume
control button labeled [ ∨ ]
If you have a display, it shows
[
RINGER L > > > > H
volume settings. On the display, 1 arrow is the
lowest setting; and 8 arrows is the highest
setting)
] winks
Select
] (x will be a number from
] to cycle through all 8
] goes off
Select
] (There are 8 possible
23