Automatic Callback - AT&T Definity 7406 Plus User Manual

To place a call using an
AD list button or code

Automatic Callback

To automatically place
another call to an
extension that was busy,
did not answer, or
returned a call waiting
ringback tone
To cancel Automatic
Callback
1 Press [ ] or [
Pers List
or Dial appropriate AD List code:
List 1
List 2
List 3
Note: An [
Enhcd List
System Manager.
2 Dial desired list item (1, 2, 3...)
Call is dialed
1
Press [ ] during call attempt
AutoCallBk
Green light goes on steadily until callback is
completed or canceled
Note: If you send your calls to coverage after
activating Automatic Callback, your callback calls
will still ring at your extension and will not be
redirected to coverage.
2
Hang up
You will get a 3-burst priority ring when both you
and the called extension are idle; when you
answer, regular ringing is sent to the called party
Note: Automatic Callback is automatically canceled
after 30 minutes.
1 Press [ ] again
AutoCallBk
Green light goes off
] or [ ]
Grp List Sys List
[dial tone]
] may also be available; see your
[confirmation tone]
[dial tone]
13