AT&T Definity 7406 Plus User Manual page 16

To place an AD call
To program/reprogram
an outside number,
extension, or feature code
into a personal list
Press selected [
1
AD xxxxx
Press [ ] first if the [
Select
on a 2-level button
2 Call is dialed (silently)
1
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal lists(s) (see
example to the left)
Note: Each phone number or feature code is stored
as a separate item.
2 Pick up handset
Note: If you are using the speakerphone, you must
press a call appearance button before you begin
Step 3.
3 Press [ ]
Program
or Dial AD Program code
4
Dial Personal List number (1, 2, or 3)
5 Dial list item (1, 2, 3...)
6
Dial number you want to store (up to 24 digits)
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
7 Press [ ]
#
Repeat Steps 5–7 if you want to program
additional items on the same list; press [
and begin again at Step 1 if you want to program
items on another list.
8 Hang up or press [
Drop Test
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this booklet;
group, system, and enhanced lists can be obtained
from your System Manager.
]
[ringback tone]
] is top-labeled
AD xxxxx
[dial tone]
[dial tone]
[dial tone]
[dial tone]
[confirmation tone]
Drop Test
] to end programming
]
12