Message; Mute - AT&T Definity 7406 Plus User Manual

To cancel a Leave Word
Calling message
Note: You cannot cancel
a message left for an
AUDIX subscriber.

Message

To retrieve a message
when your Message light
is on

Mute

Note: When you are talking on the handset, the Mute feature affects the
microphone associated with the handset rather than the speakerphone.
This feature has no effect on an external speakerphone attached to the voice
terminal.
To prevent the other
party from hearing you
(To mute the
speakerphone
microphone)
1
Press [ ]
CanceI LWC
or Dial Leave Word Calling Cancel code
2 Dial extension
Note: If reorder tone is heard, message is not
canceled; try again.
If your set has a display, see the Message Retrieval
1
procedures under the Display Features heading.
Otherwise, see your System Manager for instructions
regarding your local message retrieval procedures.
1 Press [ ]
Mute
Red light goes on and other party cannot hear
you
2
When you are ready to resume conversation with the
other party, press [
Red light goes off and other party can hear you
again
Note: When the voice terminal is set for the Speaker
(listen-only) feature, the Mute feature is activated and
the light next to [
Mute
the speaker.
The Mute feature turns off automatically when you hang
up, or switch from the speakerphone to the handset or
from the handset to the speakerphone.
[confirmation tone]
] again
Mute
] goes on whenever you are using
[dial tone]
20