Bridging; Call Coverage - AT&T Definity 7406 Plus User Manual

Bridging

To answer a bridged call
To use Manual Exclusion
to prevent other bridged
terminals from entering a
call (on a per call basis)

Call Coverage

To answer a call for a
co-worker for whom you
are a coverage point
To leave a message for a
co-worker to call the
original caller's extension
To talk privately with a
co-worker after
answering a redirected
call
Press [ ] of bridged call
1
xxxxx
Note: If your terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift
the handset.
1 Press [ ] while connected to the call
Excl xxxxx
Note: Pressing [
Excl xxxxx
bridging.
1 Press [ ] of incoming call when ring begins or
xxxxx
green light flashes
Note: The call is not at your terminal until the
green light is flashing.
1 Press [ ] while connected to the call
Cvr Callbk
Note: To leave a message for a co-worker to call you,
activate Leave Word Calling instead.
1 Press [ ]
Transfer
Call is put on hold
2 Press [ ]
Consult
or Dial co-worker's extension
] again reactivates
[confirmation tone]
[dial tone]
[priority ring to co-worker]
14