Voice Features; Handset And Speaker; Abbreviated Dialing (Ad) - AT&T Definity 7406 Plus User Manual

Handset and Speaker

When placing calls or using the voice features, you have the option of doing so off-
hook (by lifting the handset) or on-hook (by pressing [
terminal is set for the Speakerphone feature, pressing [
activates the built-in microphone so that you can place and answer calls without
lifting the handset.

Abbreviated Dialing (AD)

To program/reprogram
an AD button
Note: AD buttons must
first be assigned by
System Manager.

Voice Features

1 On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program.
Note: Each AD button will hold one complete phone
number or feature code.
2
Pick up handset
Note: If you are using the speakerphone, you must
press a call appearance button before you begin
Step 3.
3 Press [ ]
Program
or Dial AD Program code
4 Press [ ] to be programmed
AD xxxxx
Press [ ] first if the [
Select
on a 2-level button
5
Dial outside number, extension, or feature code you
want to store (up to 24 digits)
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
6 Press [ ]
#
Number is stored
Repeat Steps 4–6 to program additional buttons
Hang up or press [
7
] ) . If your voice
Speaker Reset Spkr
] simultaneously
Speaker Reset Spkr
] is top-labeled
AD xxxxx
[confirmation tone]
] to end programming
Drop Test
[dial tone]
[dial tone]
[dial tone]
11