Priority Calling; Reset Speakerphone - AT&T Definity 7406 Plus User Manual

Priority Calling

To place a priority call
(3-burst ring)
To change a regular call
into a priority call (when
you hear a call waiting
ringback tone)

Reset Speakerphone

You can adjust the speakerphone to the surrounding room acoustics to provide
optimal performance. Use the Reset Speakerphone feature in the following ways:
Whenever you move your voice terminal to another place (even in the same room)
Whenever the green light next to [
Note: You may also use this feature when you are on a call in the unlikely event
that your speakerphone makes a squealing noise during the call. When you press
[ ] and [
Select
Speaker Reset Spkr
call. (No tones will be heard.)
Important: If there has been a interruption in power (such as, the system has
just been powered up again, or you have plugged in the voice terminal at another
location), the light next to [
speakerphone.
You can initiate the Reset Speakerphone feature when your handset is on-hook, or
during a call in which you are using the built-in speakerphone. (If a call is in
progress, you will not hear the tones, and the new speakerphone adjustment is reset
for only the duration of that call.)
Remember that you can use the Reset Speakerphone feature only if your voice
terminal is set for the Speakerphone feature (as opposed to the Speaker feature).
1 Press [ ]
Priority
or Dial Priority Calling code
2 Dial the extension
Note: If your call is not answered and you wish to
redirect it to coverage, press [
ringing.
1 Press [ ]
Priority
2 Wait for called party to answer
Note: If you still receive a call waiting
ringback tone, wait a few minutes and try again.
] is fluttering
Speaker Reset Spkr
] , your speakerphone will adjust itself to normal for that
] flutters until you reset the built-in
Speaker Reset Spkr
[dial tone]
] while call is
Go to Cvr
21