Overview; Figure 2-1 Front Panel; Figure 2-2 Rear Panel; Table 2-1 Rear Panel Features - Motorola DCT700 Installation Manual

Section 2

Overview

This section describes the DCT700's displays and connectors. Before you begin to install the
DCT700, familiarize yourself with these displays and connectors.
Figure 2-1
Front panel
The DCT700 front panel has two LEDs:
Indicates that the unit is on
ON
Indicates that a message is present
MESSAGES
Figure 2-2
Rear panel
Table 2-1
Rear panel features
Key Function
Left and right audio RCA jacks used for stereo audio output.
1
RCA jack used to connect the DCT700 to a composite (baseband) video TV or a monitor; in
2
some configurations this jack connects to a VCR.
F-type connector used for DCT700 input from the
3
F-type connector used to connect the DCT700 to a standard TV or VCR.
4
DC power connection.
5
For instructions on connecting the DCT700, see Section 3, "Installation."
A remote control is required to operate the DCT700. We recommend the Motorola DRC450. See
"Remote Control" in this section for information.
ON MESSAGES
TV/VCR
RF IN
3
1 2
TO
L
+12V
DC
R
AUDIO VIDEO
5
4
connector.
TO RF IN
DCT700 Installation Manual