Introduction; Standard Features; Standard Interfaces; Using This Manual - Motorola DCT700 Installation Manual

1-2

Introduction

Standard Features

MPEG-2 digital video processor
!
ATSC standard Dolby
!
ITU standard 64/256 QAM FEC enhanced adaptive equalizer
!
On-board real-time RF return (256 Kbps)
!
Bitmapped graphics display (4/8-bit)
!
88.75 to 858 MHz tuner
!
DES based encryption/DCII access control
!
Digital diagnostics
!
Frequency agile 2.048 Mbps out-of-band data receiver
!
Macrovision copy protection
!
IR support for remote control
!

Standard Interfaces

RF remod output (ch. 3, 4)
!
Baseband video and audio Outputs
!

Using This Manual

This manual provides instructions to install and configure a DCT700:
Section 1 Introduction provides a product description, a list of related documentation, the technical
helpline telephone number, and the repair/return procedure.
Section 2 Overview describes the DCT700 and provides an overview of its use. This section also
identifies the front-panel displays and switches and describes the
rear-panel features.
Section 3 Installation provides instructions on how to install the DCT700 in a subscriber location
and perform operational tests.
Section 4 Troubleshooting provides guidelines for troubleshooting the equipment.
Appendix A Specifications provide the technical specifications for the DCT700.
Appendix B Diagnostics provide instructions on accessing and interpreting the built-in diagnostics.
Abbreviations The Abbreviations and Acronyms list contains the full spelling of the short forms used in
this manual.
and
Acronyms

Related Documentation

Although the DCT700 User Guide may be useful, it is not necessary to install or operate the
DCT700 if you have this manual.
DCT700 Installation Manual
® Digital (AC-3) audio processor