Set-Top Cold Initialization - Motorola DCT700 Installation Manual

Press SELECT to begin searching for the OOB frequency.
3
On the OSD the MANUAL FREQ line of text clears, the HUNT MODE displays FIX to
indicate the fixed frequency search, and the CUR FREQ field changes to the frequency
selected to search.
If the frequency is found with the proper EMM Provider ID, the OSD LKC field changes to
display the new frequency.
If after 40 seconds the frequency search is not successful, the set-top performs a warm reset
and returns to the last known carrier frequency.
To abort a search without waiting the 40 seconds, press
4

Set-top Cold Initialization

The DCT700 has no front panel buttons. To perform a cold initialization, or reset, using the
remote control:
Hold down any key while disconnecting and reconnecting AC power to the set-top.
1
After booting up, the
Within 3 seconds, press 3.
2
The LED flashes at a decreased rate.
POWER
Within 3 seconds, press 2.
3
The LED flashes at an increased rate.
POWER
Within 3 seconds, press 8 to initiate the cold reset.
4
During the cold initialization procedure, if the appropriate remote control key is not pressed
within the three-second time period, the procedure terminates and the set-top resumes
normal operation.
LED on the set-top front panel flashes.
POWER
Installation
to cause a warm reset.
POWER
DCT700 Installation Manual
3-9